Electrical Connection - RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning

i

8.2 Electrical connection

1.
Ensure the mains is disconnected and check whether the mains
power cables are current-free.
2.
Securely lay all connecting cables right into the flush-mounted
box.
3.
Remove the insulation on all leads down to 6 mm in length
and connect them according to the connection diagram on the
following pages.
4.
After the electrical connection, the installation of the DuoFern
Room Thermostat 9485 into the flush-mounted box is carried
out, see page 45.
42
EN