RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning page 114

19. Logging on to the HomePilot®
2.
Activate the login procedure of the DuoFern Room Thermostat
9485 in menu 9.9.1, see page 103.
3.
Two devices are displayed in the left table after successfully
logging on:
◆ A room thermostat (actuator)
◆ A temperature sensor (sensor)
4.
Click on the desired device and assign an individual name or a
different description, if required. In addition, a graphic symbol
can be selected for the logged-on device.
5.
Save the settings.
The logged-on device is then listed on the left under sensors
and devices and can be used immediately.
114
EN