Safety Instructions For The Electrical Connection - RADEMACHER 9485 Instruction Manual For The Electrical Connection And For Commissioning

i

8. Safety instructions for the electrical connection

Prior to the electrical connection, check that the voltage / frequen-
cy on the type plate corresponds to that of the local mains supply.
There is a risk of fatal electric shock when touching
electrical components.
◆ All connection and installation work must only
be carried out in a de-energised state.
◆ Disconnect all phases of the mains power cable
and secure it to prevent any reconnection.
◆ Check that the system is de-energised.
There is a risk of fatal injury caused by short circuiting when
the DuoFern Room Thermostat 9485 is overloaded.
The maximum switching capacity must not be exceeded, for
this, please observe the details in the technical specifications,
see page 30.
38
Read the specifications relating to the electrical
connection detailed in the instruction manual of the
electrical appliance used.
DANGER!
WARNING!
EN