Modifying The Crescendo And Tuttis - Allen Organ Company Quantum User Manual

Restoring Original Factory Settings
See Section B-4 to restore all piston configurations back to their factory settings.
RE-INITIALIZE
PISTON CONFIG.
The examples above determine only which stops/drawknobs will become
REMEMBER:
accessible by the reconfigured pistons; they will not change previously saved registrations.
3.

MODIFYING THE CRESCENDO AND TUTTIS

The original factory settings include a second set of Tuttis and a second set of Crescendo settings
that can be altered to suit the organist's needs.
Advance to the window function 'SET CRESC B AND TUTTI B'. There are two modes available
in this window function, "SET" and "SHOW".
SET Mode: Set mode allows the organist to create or edit a Crescendo B sequence.
SHOW Mode: Show mode allows the organist to view the Crescendo B sequence using the "▲"
or "▼" buttons in the Console Controller™ or by using the Crescendo Shoe.
To toggle between modes press "◄" or "►" in the Console Controller™. The display will
indicate which mode is activated.
SET CRESC B AND SHOW CRESC B AND
TUTTI B TUTTI B
To view the stops/drawknobs registered to the second TUTTI I or TUTTI II, press either TUTTI.
This will cause all associated stops/drawknobs programmed on the TUTTI selected to turn on.
The Crescendo includes 50 positions evenly dispersed along the Crescendo shoe's range of travel.
To set a Crescendo B sequence, use the two buttons in the Console Controller™ labeled "▲" and
"▼" to move through the steps. Pressing either "▲" or "▼" in the Console Controller™ or
moving the Crescendo Shoe will cause the display to change to...
SET CRESC B AND
TUTTI B step xxx
The word "step xxx" will appear on the second line indicating that you are now editing or viewing
(dependant if SET or SHOW mode is active) the Crescendo B sequence. The "step xxx" indicator
will display either "step off" to indicate position 0 (Crescendo shoe off) or any step between 1 an
50. Any stops/controls associated with a particular Crescendo step will move to indicate their
status when using the Crescendo Shoe only. While in 'SET' mode, using the "▲" or "▼"
buttons will not cause the stops/controls to indicate their status.
Software Version 3.02x 25