E. Quick Reference Guide - Allen Organ Company Quantum User Manual

E. QUICK REFERENCE GUIDE
1. BASIC OPERATIONS REVIEW
a. ADVANCING THROUGH THE WINDOWS:
Hold SET, press "R".
b. RETURN TO THE FIRST WINDOW:
Hold SET, press CANCEL, release both.
c. SETTING PISTONS:
First window. Select desired registration. Hold SET and press piston to remember
registration.
d. SELECT MEMORY AND LOCK IT:
Main window. Select desired memory using "▲" and "▼" buttons. Press and hold
MEMORY, enter three-digit code, release MEMORY, "L" will appear.
e. UNLOCK A MEMORY:
Repeat d. above. "L" will disappear.
f. UNLOCK ALL MEMORIES WITHOUT CODE:
Advance to display "Unlock All Capture Memories". Press and hold MEMORY, press
General Pistons 2-5-5, release MEMORY. Window will display "Done!!"
g. SET CLOCK:
Advance to display: "Set Clock". Use "▲" and "▼" to change the digits. Use "◄" and
"►" to move from hours to minutes. Press and hold SET, press CANCEL, release both to
reset clock.
h. SELF-CHECK CAPTURE AND STOP ACTION:
Advance to display: "Self-Check". Press Great Piston 1. To discontinue, Press and hold
SET, press CANCEL, release both, and return to the main window.
2. ADVANCED OPERATIONS REVIEW
a. RECONFIGURING PISTONS:
Advance to display: "Configure Pistons". Select the desired stops. Press and hold SET,
press the desired piston. Return to Main window (press SET and CANCEL) and set new
registrations (see section E-1, c.).
b. SET SECONDARY CRESCENDO "B":
Advance to display: "Set Cresc B and Tutti B". Maneuver/Set step positions using the
Console Controller™ buttons and SET piston.
Software Version 3.02x 45