Global Tuning - Allen Organ Company Quantum User Manual

4 manual series classical organs with version 3.02x software
Table of Contents

Advertisement

6.

GLOBAL TUNING

Global Tuning allows the organist to adjust the pitch of the entire organ. This tuning adjustment
allows the organ to be tuned to another instrument more easily. Tuning can be adjusted either ±
100 cents from A-440 pitch. To adjust Global Tuning, advance to the GLOBAL TUNING
window function (see Section A-2).
Use the "▲" and "▼" buttons in the Console Controller™ to raise or lower the pitch. The Global
Tuning adjustment will be retained in memory when the organ is powered off.
7.
PISTON SEQUENCER
(3-manual or larger, Classical models)
The Piston Sequencer allows the organist to step through a sequence of registrations using
piston/toe studs labeled "+" and "-". Four modes of operation are available.
OFF: The Piston Sequencer is disabled. The "+" and "-" pistons/toe studs do not function.
SIMPLE STEPPER: This mode allows the organist to step sequentially through the available
General pistons of a single capture memory level.
ADVANCED STEPPER:
available General pistons of all capture memory levels.
CUSTOM SEQS: This mode allows the organist to step sequentially through a user programmed
piston sequence of any available piston and capture memory level. Piston Sequence memory
allows 512 steps allocated to a maximum of 99 sequences. Note: Custom piston sequence data
cannot be saved via an external MIDI recording device.
OFF MODE
To select the OFF mode advance to the "Piston Sequencer" window.
Use the "▲" or "▼" buttons in the Console Controller™ to switch to the OFF mode. OFF is the
default power up mode. If Piston Sequencer has been enabled previously, the OFF mode may be
selected to disable the sequencer.
SIMPLE STEPPER MODE
To select the SIMPLE STEPPER mode, advance to the 'PISTON SEQUENCER' window
function. Use the "▲" or "▼" buttons in the Console Controller™ to switch to the SIMPLE
STEPPER Mode. Return to the Main window function (see Section A-2). The letters "SS" on the
second line after the clock display indicates that the SIMPLE STEPPER has been activated.
PISTON SEQUENCER
SIMPLE STEPPER
GLOBAL TUNE:
0
This mode allows the organist to step sequentially through the
PISTON SEQUENCER
OFF
Software Version 3.02x
MEM: 1
Gen
HH:MM:SS AM SS U
1
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents