Unlocking Memories Using Your Code - Allen Organ Company Quantum User Manual

6.

UNLOCKING MEMORIES USING YOUR CODE

The main window function must be displayed (See Section A-2). To unlock a memory, select the
memory to be unlocked, using the "▲" and "▼" buttons. Once a memory is selected, press and
hold the MEMORY button in the Console Controller™. While pressing MEMORY, enter the
same three-digit code that was used to lock this memory (See Section A-5), using General Pistons
1 through 10 (Piston 10 = zero). Then release the MEMORY button. The "L" will disappear,
indicating that this memory is now unlocked.
7. UNLOCKING ALL MEMORIES IF YOU FORGET YOUR CODE
Advance to the 'UNLOCK ALL CAPTURE MEMORIES' window function (see section A-2).
Press and hold the MEMORY button on the Console Controller™ and press General Pistons
2-5-5. Release the MEMORY button, the window will display:
The display will automatically return to the Main window function. All capture memories are
now unlocked, including those memories, other organists may have locked. Registrations remain
unchanged.
SETTING THE CLOCK
8.
Advance to the SET CLOCK window function.
Use the "▲" and "▼" buttons to change the digits and "◄" and "►" to move between hours and
minutes. Press and hold the SET piston. Then press and release the CANCEL piston to reset the
clock.
Note: The clock always resets the seconds to zero when you use SET and CANCEL to leave this
window function.
MEM: 2
00:00:00 am
UNLOCK ALL
CAPTURE MEMORIES
DONE!!
SET CLOCK
00:00:00 am
Software Version 3.02x
P
20