Restoring Original Factory Settings - Allen Organ Company Quantum User Manual

4.

RESTORING ORIGINAL FACTORY SETTINGS

Advance to the RE-INITIALIZE window function (see Section A-2). The window will display...
Certain functions can be restored to the original factory settings. They are:
RE-INITIALIZE
PISTON CONFIG.
RE-INITIALIZE
CAPTURE MEM. XX
Each of these functions can be restored individually. Select the factory settings you wish to
restore by using the "▲" and "▼" buttons on the Console Controller™. Press and hold the
MEMORY button in the Console Controller™. While holding the MEMORY button, press
General Pistons 2-5-5 in sequence. The display will briefly flash the word "DONE!!" on the first
line of the display to indicate that the current selection has been re-initialized.
Notice the term VENTIL B on the TUTTI/VENTIL B initialize window. This is a function that is
used on an Allen custom organ. On most Allen Organs you can disregard the term VENTIL B as
it does not apply. If you are playing a custom model, the RE-INITIALIZE procedure described
above will return the secondary TUTTI B as well as the VENTIL B settings to the original factory
settings.
5. SOSTENUTO
Sostenuto is an Italian word meaning "sustained." Unlike the sustain switch, which sustains any
notes played as long as the sustain switch is held on, the Sostenuto switch sustains only the notes
being held at the very moment it is pressed. Sostenuto is actuated by the organ's Sustain switch
(which is optional on some organs) located to the left of the Great/Pedal expression shoe. The
Sostenuto function must first be enabled before using it.
Advance to the 'SOSTENUTO' window function (see Section A-2).
The LCD will indicate what keyboard Sostenuto is assigned to and show the current on/off status.
The keyboard that Sostenuto is assigned to cannot be changed, but the on/off status can. Use the
"▲" and "▼" buttons in the Console Controller™ to turn the Sostenuto function ON/OFF.
Sostenuto will affect the internal voices of the organ as well as a MIDI instrument connected to
the MIDI output. Keep in mind that the Sustain function will operate in tandem with the
Sostenuto function. Note: Check your specific MIDI instrument's owner's manual to verify that it
will receive and/or respond to MIDI Sostenuto messages.
RE-INITIALIZE
PISTON CONFIG.
RE-INITIALIZE
TUTTI/VENTIL B
SOSTENUTO
GT = ON
Software Version 3.02x
RE-INITIALIZE
MIDI SETTINGS
RE-INITIALIZE
CRESC B SETTINGS
28