Allen Organ Company Quantum User Manual page 28

Manually disabling Celestes and Tremulants:
You can manually disable the celestes and tremulants at any of the available Crescendo steps or
Tutti I or Tutti II positions. Advance to the 'SET CRESC B AND TUTTI B' window function.
SET CRESC B AND
TUTTI B
Select the stops/drawknobs for the Crescendo step you wish to program or select a current
Crescendo step or Tutti I or II position. If the current Crescendo step or Tutti position has already
been programmed, the stops/drawknobs will turn on or off in respect to the Crescendo step or
Tutti position selected. Turn the Transposer switch until the Transposer's Red LED lights. Press
and hold the SET piston, then press the corresponding Crescendo step piston or Tutti I or II
position to store the setting. To retain the manual disabling of the celestes and tremulants in a
Crescendo sequence, the above procedure must be programmed into all subsequent Crescendo
steps. After you complete this process, return to the Main Window function (See Section A-2).
Note: Registrations and memory settings for the PISTONS are not affected by resetting the
CRESCENDO "B".
Play Organ Using Secondary Crescendo "B"
The Main Window function must be displayed (see Section A-2). Press the CRES. B piston. On
the bar-graph display, the green CRESC-B indicator will illuminate. Push open the Crescendo
Shoe and play.
EDITING TUTTI B REGISTRATIONS
Advance to the window function 'SET CRESC B AND TUTTI B'. In this version of software
there is one mode available for setting Tutti B registrations, "SET" mode. The display will
automatically revert to "SET" mode when pressing either Tutti piston if in the "SHOW" mode.
To view a Tutti registration press either Tutti piston. The display will indicate which Tutti was
selected.
SET CRESC B AND
TUTTI B tutti 1
You may now view/edit the Tutti registration. To save any changes press and hold the SET
piston. Then press the MEMORY button in the Console Controller™. The display will briefly
flash the word "DONE!!" on the first line. Release both the SET piston and MEMORY button..
The new registration is now stored as the Tutti number indicated in the display.
Playing the organ Using Secondary Tuttis
The Main Window function must be displayed (see Section A-2). Press the CRES. B piston. On
the bar-graph display, the green CRESC-B indicator will illuminate. Press the Tutti piston of
your choice. The bar-graph's red Tutti indicators will light to indicate which Tutti is active. The
Tutti pistons function like General Pistons and customarily have large registrations. However, the
registered stops/drawknobs do not move to their ON positions when a Tutti piston is selected.
Software Version 3.02x 27