Modifying The Crescendo And Tutti's - Allen Organ Company Protégé LD-34 Owner's Manual

3.

Modifying the Crescendo and Tutti's

The original factory settings include a second set of Tutti's and a second set of Crescendo
settings that can be altered to suit the organist's needs.
Advance to the 'CRESC/TUTTI B' window function (see section A-2). There are two modes
available in this window function, "SET" and "SHOW".
SET Mode: Set mode allows the organist to create or edit a Crescendo B sequence.
SHOW Mode: Show mode allows the organist to view the Crescendo B sequence using the
ROTARY DIAL on the Console Controller or by using the Crescendo Shoe.
To toggle between modes press the CURSOR button on the Console Controller until the
flashing cursor is positioned on the mode name (Set or Show). Turn the ROTARY DIAL to
change modes. The display will indicate which mode is activated.
CRESC/TUTTI B
SET
To view the stops registered on the second (B) TUTTI I or TUTTI II, press either TUTTI.
This will cause all associated stops programmed on the TUTTI selected to turn on.
Setting a Crescendo B Sequence:
The Crescendo includes 22 positions evenly dispersed along the Crescendo shoe's range of
travel. To set a Crescendo B sequence, advance to the 'CRESC/TUTTI B' window function
(see Section A-2). Press the CURSOR button until the flashing cursor is positioned on the
word "step" on line two. Turn the ROTARY DIAL to change the step positions.
The word "step xx" indicates that you are now editing or viewing (dependent if SET or
SHOW mode is active) the Crescendo B sequence. The "step xx" indicator will display either
"step --" to indicate position 0 (Crescendo shoe off) or any step between 1 and 22. As in
previous software versions, any stops/controls associated with a particular Crescendo step
will light to indicate their status when using the Crescendo Shoe only. While in 'SET'
mode, turning the ROTARY DIAL will not cause the stops/controls to indicate their status.
step --
CRESC/TUTTI B
SET step --
CRESC/TUTTI B
SHOW step --
24