Sony PXW-Z90T Operating Manual page 136

Menu items (Continued)
Item
COLOR
CORRECTION
136
Sub-items
Sets the color correction.
• Setting both memories to the same setting doubles the color correction effect.
• The settings of [COLOR CORRECTION] will be retained even if the power is
turned off. However, if you want to correct colors that may change according to
time of the day, weather, location, etc., it is recommended that you set [COLOR
CORRECTION] again prior to recording.
• Changing the white balance value or the settings of [WB SHIFT],
[SATURATION] or [COLOR PHASE] of the picture profile will change the
color settings and colors that are corrected.
• If the above settings have been changed since [COLOR CORRECTION] was
configured, check the [COLOR CORRECTION] settings prior to recording.
• During the automatic white balance adjustment, the white balance value
automatically varies according to the lighting of the subject. Manual white
balance adjustment is recommended when you use [COLOR CORRECTION].
TYPE
MEMORY
SELECTION
Settings Description
OFF, COLOR Selects the color correction type.
REVISION, OFF: Do not perform color
COLOR correction.
EXTRACT COLOR REVISION: Corrects
the colors configured in
memory.
• Colors not configured in
memory (displayed in black
and white when [COLOR
EXTRACT] is set) will not be
corrected.
COLOR EXTRACT: Displays
only the colors that are
configured in memory in
color.
• The other areas are displayed
in black and white. You can
use this function as an effect in
your movies or to check the
colors configured in memory.
1, 2, 1&2 Selects a memory to enable.
1: Enables memory 1 settings
only.
2: Enables memory 2 settings
only.
1&2: Enables settings in both
memory 1 and 2.