Sony PXW-Z90T Operating Manual page 150

Warning indicators and messages (Continued)
This memory card may not be able to
record or play images correctly.
• Use a memory card recommended for
your camcorder (p. 28).
• Contact your Sony dealer.
Do not eject the memory card during
writing. Data may be damaged.
• Reinsert the memory card, and follow
the instructions on the LCD screen.
Other
Maximum number of images already
selected.
• You can select only 100 images at one
time for:
– Deleting movies/photos
– Protecting movies/photos, or
releasing the protection
Protected file. Cannot delete.
• An attempt was made to delete
protected data. Release the protection
of the data.
Error messages
The following error messages may appear if
trouble occurs during FTP transfer,
streaming distribution connection, or
Wireless TC LINK connection. Try the
solution suggested on the display.
No registered access point.
There are no access points registered.
(NETWORK SET) t [Wi-Fi
Select
SET] t [ACCESS POINT SET], and
register an access point.
Cannot find connectable access
point.
Set the access point setting.
An access point could not be found. Select
(NETWORK SET) t [Wi-Fi SET]
150
t [ACCESS POINT SET], and check
the access point settings.
Connection to the access point
failed.
Please input your password again.
Could not connect to the access point. Try
re-entering the password for the access
point.
Connection with an access point
disconnected.
Check the connection condition.
Connection to the access point was
disconnected. Check the access point
connection conditions.
No response from the access point.
There was no response from the access
point. Check the connection with the
access point.
Failed to acquire an IP address.
Change the IP address setting.
Could not acquire the IP address.
If connecting to a network via a wireless
(NETWORK SET) t
LAN, select
[Wi-Fi SET] t [ACCESS POINT SET],
and specify the IP address manually.
If connecting to a network via a wired
LAN, select (NETWORK SET) t
[WIRED LAN SET], and specify the IP
address manually.
Failed to acquire an IP address.
Check the DNS server setting.
Could not acquire the IP address. Check
the DNS server settings.
Network error occurred.
A Wi-Fi communication error occurred.
Check the USB device connection.
Check the USB device connection.