Sony PXW-Z90T Operating Manual page 23

Solid-state memory solid-state memory camcorder
Table of Contents

Advertisement

To store the battery pack
If the battery pack is not in use for a while,
run down the battery and store it (p. 164).
Charging time
Approximate time (minutes) required when
you charge a fully discharged battery pack.
Battery pack
NP-FV70A
On the battery pack
• Turn the power off before changing the battery
pack.
• The CHG lamp flashes during charging, or the
Battery Info will not be correctly displayed
under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out.
Using a power outlet
You can use the AC Adaptor to obtain the
AC power. While you are using the AC
Adaptor, the battery pack will not lose its
charge even when it is attached to your
camcorder.
Perform the procedure up to step 2 of "Step
2: Charging the battery pack" (p. 22).
Full charge time
170
On the AC Adaptor
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pxw-z90v

Table of Contents