Turning The System On When It Is Not Ready - BRINKS BHS i 100 User Manual

BrinksKeyPadPrinterSprd.2.22.06

Turning the System On When It Is Not Ready

If the system is not ready to turn on, the message window of your keypad
displays NOT READY. This message could mean, for example, that one of the
protected windows in your house is open.
If you press the ON key when the system is not ready to turn on, the keypad
sounds an error tone and the system does not turn on.
To make the system ready to arm and to turn it on, do the following:
1. Observe the number displayed in the message
window. This is the zone that needs to be corrected
before the system will turn on. (There may be more
than one, if so, the numbers are shown one at a
time.)
2. Refer to the Pop Up Grid Identification Card to
verify the zone's location.
3. If the zone is a door or window, make sure that it is
securely closed.
4. If the message window displays READY, turn the
READY
system on.
5. If the message window displays NOT READY, see
the Frequently Asked Questions information at
www.mybrinks.com or call Customer Care at
1-800-445-0872 for further assistance in correcting
the not ready condition.
2/22/06 3:06 PM Page 44
NOT READY ALL ON INSTANT
06 AM
DOOR CHIME NO AC MOTION OFF
PM
TROUBLE TEST LINE CUT LOW BATT
ALARM MEMORY AUXILIARY CODES
BYPASS ENTER MASTER USER : I : I :
CANCELED
800-445-0872 ZONE : I : I :
CALL NEW CODE
16
Testing With Not Ready Zones
If the system is not ready to test, the message window displays NOT READY.
Do the following:
06
TROUBLE
ALARM
CANCELED
800-445-0872 ZONE : I : I :
CALL
1. Observe which zone number is displayed. This is
the zone that is not ready.
2. Refer to the Pop-Up Grid Identification Card to
verify the location of the zone.
3. If the zone is a door or window, make sure that it is
securely closed.
4. If the message window now displays READY
READY
conduct the test.
5. If the message window still displays NOT READY,
call Customer Care at 1-800-445-0872 for
assistance.
29
NOT READY ALL ON INSTANT
DOOR CHIME NO AC MOTION OFF
TEST LINE CUT LOW BATT
MEMORY AUXILIARY CODES
BYPASS ENTER MASTER USER : I : I :
NEW CODE