Message Window - BRINKS BHS i 100 User Manual

BrinksKeyPadPrinterSprd.2.22.06
Zone Trouble Indication
What it means: A trouble on a zone condition would arise if, for example, the
smoke detector is dirty or is in need of adjustment. It could also occur if a
sensor has a defective part or a broken wire.
What to do:
1. To silence the keypad's beeping, press the CANCEL
key.
2. Wait 30 minutes for the system to reset.
3. If the detector has not reset after 30 minutes, the
trouble message returns and the keypad beeps. Call
Brink's Customer Care at 1-800-445-0872.
Component Failure
One of the system's devices is not operating properly. Call Brink's Customer
Care at 1-800-445-0872 for assistance.
Call Brink's Indication
If you receive this trouble message, call Brink's Customer Care at
1-800-445-0872 for assistance.
Siren Failure Indication
The system's siren is not operating properly. Call Brink's Customer Care at
1-800-445-0872 for assistance.
2/22/06 3:06 PM Page 30
36

Message Window

The keypad communicates with you by lighting the words and phrases in the
message window. The words that make up the message may be on different
lines, or separated by other words.
For example, while you are changing an auxiliary user code, you will see the
following message window:
The words "ENTER" and "NEW CODE" are lit. This means that you should
enter the new user code.
9