Accessories (Various Models) - Huffy Cruiser Owner's Manual

Accessories (various models)

LUGGAGE RACK ADJUSTMENT:
1. Loosen Adjustment Knob
counter clockwise.
2. Slide Adjustable Rack
3. Tighten with Adjustment Knob
clockwise.
NOTE: Do not over-tighten. This will damage the
Knob.
INSULATED BAG INSTALL:
1. Attach Bag A
Handlebar by sliding the
Back Brace B
into the Bracket Slots
2. If needed, adjust Brackets
C
by loosening Screws
D
, and moving Brackets
closer together or further
apart so that Bag fi ts into
the Brackets Slots.
3. Tighten Screws
Securely.
CUP HOLDER (VARIOUS):
NOTE:
• Bracket may be pre-
installed and only need to
be adjusted.
• Be careful not to scratch
painted handlebars.
Installation:
A
1. Attach Cup
B
Bracket using two
Screws C . Tighten
securely.
Position Cup and Bracket level on Handlebar and attach Clamp Half
2.
D . Tighten securely.
NOTE: Slide Clamp halves slide together at Notch
A
by turning
B into position
A
to
securely
C
.
D
A C
to
by turning
B
D
B D
E and attach with one Screw.
A
A
B
C
A
D
B with Screw(s)
B
C
E
D
19