Mounted Wire Basket Assembly - Huffy Cruiser Owner's Manual

Mounted Wire Basket Assembly (if equipped)
Installation:
1. Attach Support Legs
B
Basket using Bracket
D
, 2 Washers
Tighten Securely.
2. Make sure top of Support Legs
between Bracket
3. Install the front wheel into the fork
as described in the owner's manual.
Ensure the wheel retainer clips are
located in the holes in the fork.
4. Remove the front Axle Nuts
With the retainer
clips still on the
fork, place the
Support Legs
onto the Axle
on both sides.
5. Reinstall the Axle
G
Nuts hand
tight.
6. Place Basket into
position against upper
I
Bracket
with 2 Screws
Washers E
F . Tighten Securely.
7. Realign the front
wheel as needed and tighten Axle
Nuts securely according to Torque
Chart.
WARNING:
• Failure to obey these steps can allow the front wheel to loosen while riding. This can
cause injury to the rider or to others.
• Maximum basket weight is 4.5kg (10lbs).
12
A
to bottom of
C
, 2 Screws
E F
and 2 Nuts
C
and Basket.
G
A
H
B
A
E
and attach
D , 2
F
and 2 Nuts
D
.
A
set
.
C
B
G
E
F
I
A
H