Rim Brake System: Setup And Adjustment - Huffy Cruiser Owner's Manual

Linear Pull Brake System Adjustment - Before Starting
IF EQUIPPED: The Following Sections Describe Final Brake System Adjustments Re-
quired Before Riding.
• Infl ate Tires to recommended
pressure on Tire side wall.
• Make sure Tire is centered in
Fork.
• If Needed, Re-attach Front
Brake Cable:
• Squeeze the two Brake
arms together
• Insert the Brake
Cable Guide
into the cutout
in the Guide
Bracket C
• Make sure the
Brake Cable
Guide B is
seated securely
in the Guide
C
Bracket
cutout.
Final Brake Adjustment Before Riding
Check tightness of the cantilever mounting Bolt
• Make sure each cantilever mounting Bolt is tightened securely.
Center brake shoes on rim:
1. Turn the Adjustment Screw
the cantilever arm to move the arm
in or out so each Brake Shoe
the same distance from the rim.
2. Squeeze the brake lever two times.
3. Do this step again, until both brake
shoes are the same distance from
the rim.
24
A
.
B
C
.
B
C
A
B
A
g A
on
is
C
A
B
C
(fi g A):
A
B