Front Wheel Install - Huffy Cruiser Owner's Manual

Front Wheel Install:

WARNING
• Do NOT use Axle Nuts without serrations to attach the front wheel.
• Ensure wheel spins freely without contacting fork or fender.
• Failure to obey these steps can allow the front wheel to loosen while riding. This can cause
injury to the rider or to others.
1. If the Axle Nuts
the front wheel axle, begin by removing
them with an open end wrench or
adjustable wrench.
2. Set the wheel into the front fork
3. Install wheel retainers
the tabs are in the fork
4. Attach the front wheel with the Axle
Nuts A .
5. With the wheel in the center of the
fork and tighten both nuts securely.
10
:
A
are already attached to
B
C making sure
D tab holes.
D
.
A
A
C
B
C