Training Wheel Installation (Various Models) - Huffy freewheel Owner's Manual

Training Wheel Installation (various models)

A
30
To attach the Training Wheels (30) to the
Frame:
1. Remove outside Axle Nuts (A) from
both sides of Axle (C).
2. Put the Alignment Tab (B) and a
Training Wheel Leg (30) and an Axle
nut (A) on each end of the rear wheel
Axle (C).
WARNING: Make sure the notch
of the tab of the Alignment Tab (B) is
to the rear of the axle and in the slot of
the frame (fi g 19).
16
B
B
C
30
C
B
A
fig 18
fig 19
continued >>