Re-Attach Front Brake Cable - Huffy Cruiser Owner's Manual

Re-attach Front Brake Cable (If Equipped):

Re-attach Front Brake Cable:

1. Squeeze the two Brake arms together
A
.
2. Insert the Brake Cable Guide
cutout in the Guide Bracket
3. Make sure the Brake Cable Guide
seated securely in the Guide Bracket
cutout.
Check Front Brake Adjustment Before
See Maintenance > Brakes Section
Rear Fender Assembly
Attach Lower Fender Braces:
1. Line up the Rear Fender Braces
with the Frame Mounting Tabs
2. Insert each lower mounting Bolt
into the Frame Mounting Tabs
tighten securely. Make sure fender is
centered over tire.
Tighten Top Fender Mount:
Note: Top Fender mount is loose to allow
installation.
D
3. Tighten Bolt
Make sure fender is centered over tire.
Note: Ensure wheel spins freely without con-
tacting frame or fender.
B
into the
C
.
B
WARNING:
Riding!
A
B
.
C
B
and
E
and Nut securely.
is
A
C
C
A
B
D
B
C
B
C
E
A
11