Advanced Options; Figure 13 Advanced Options - Honeywell XYR 6000 User Manual

Advanced Options

Advanced options are non-typical configuration commands.
Item
Key Server Communication
Method
Read Tracelog Flag
Write Tracelog Flag
Select Infrared Communication
Port
Read TX Power Level
Revision 1 OneWireless XYR 6000 Wireless Valve Position Sensor User's Manual
1/15/09

Figure 13 Advanced Options

Table 13 Advanced Options
Description
Determines how the PDA will receive security keys from the PC's Key Server
Manager application. From the Comm Method menu select one of the
following methods.
ActiveSync – Select this to receive keys over a USB connection, such as
while the PDA battery is being charged in its base.
Infrared – Select this to receive keys over the infrared port.
Important: The Comm Method settings match in the PC's Key Server
Manager and in the Authentication Device (both must be set to Infrared or both
to ActiveSync) in order for your PDA to receive security keys.
Not available for sensors. Used with multinodes. Reads conditional tracelog
flag value. Tracelog flags are used to enable and disable logging functionality
used for field support.
Not available for sensors. Used with multinodes. Writes conditional tracelog
flag value. Tracelog flags are used to enable and disable logging functionality
used for field support .
Overrides the detected infrared communication port detected on your PDA. If
infrared communication is not functioning, you can override the detected
settings using this option.
Reads the transmission power level of the sensor radio.
5. 4BOperation
5.6. Authentication Device Menus
35