Honeywell XYR 6000 User Manual page 41

To connect your sensor to the OneWireless network perform the following steps.
Step
If the PDA contains no keys, obtain new security keys from the PC
1
application Key Server Manager.
To do this, select Receive Security Keys. Keys can be received either
through Infrared (by aiming PDA at the infrared dongle) or through an
ActiveSync/USB connection. See Key Server Communication Method
under Advanced options on page 35 for details.
Important: The Comm Method settings must match in the PC's Key Server
Manager and in the Authentication Device (both must be set to Infrared or
both to ActiveSync) in order for your PDA to receive security keys. See Key
Server Communication Method under Advanced options on page page 35
for details.
When the Authentication Device has valid unexpired keys, aim it at the
2
sensor and transmit a key to the sensor. The sensor will validate the key and
then use it to make a connection to the OneWireless Network. The Sensor
may continue to show the diagnostic message "NO KEY" for a brief time
while it validates the key before showing the "DISCOVER" message.
To verify your sensor has been authenticated, see the Connection prompt on
the Read Node Info screen (page 33).
To decommission your sensor from the OneWireless network, select Clear Key and Restart Node. This
clears the sensor's key, network and security configurations, and resets the sensor to its factory default
settings. perform the following steps.
Select Clear Keys from Handheld (under Advanced Options) when:
•
The PDA has keys from one system, but you have moved your Authentication Device to another
system, or
•
You want to clear all keys so that you cannot deploy any more keys without going to the key server
manager and getting more.
For more details on keys, refer to Getting Started with Honeywell OneWireless Solutions.
Revision 1 OneWireless XYR 6000 Wireless Valve Position Sensor User's Manual
1/15/09
Action
5. 4BOperation
5.6. Authentication Device Menus
31