Advertisement
10
MAINTENANCE AND CLEANING
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected
and must not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4) The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
CAUTION
Disconnect from mains before starting maintenance operation.
In order to make the lights in good condition and extend the life time, we suggest a regular
cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to
accumulation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure
that the circuit contacts are in good condition, prevent the poor contact of circuit from
overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never
use alcohol or solvents.
There are no serviceable parts inside the device. Please refer to the instructions under
"Installation instructions".
Should you need any spare parts, please order genuine parts from your local dealer.
PR LIGHTING LTD.
http://www.pr-lighting.com
1582 Xingye Avenue, Nancun Panyu
Guangzhou, 511442 China
TEL: +86-20-3995 2888
JNR DOT BEAM
JNR-8127
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PR Lighting JNR DOT BEAM
Summary of Contents for PR Lighting JNR DOT BEAM
-
Page 1: Maintenance And Cleaning
There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”. Should you need any spare parts, please order genuine parts from your local dealer. JNR DOT BEAM PR LIGHTING LTD. JNR-8127 http://www.pr-lighting.com... -
Page 2: Safety Instructions
No function SAFETY INSTRUCTIONS 5-24 Internal program 1 Internal 25-49 Internal program 2 Dynamic 50-74 Internal program 3 CAU T I O N Programs 75-99 Internal program 4 Becareful with your operations.With a dangerous voltage you cansuffer a 100-124 Internal program 5 dangerous electric shock when touching wires! 125-149 Internal program 6... -
Page 3: Dmx Channels
DMX CHANNELS UNPACKING Mode/CH Function Values Description Thank you for choosing our JNR DOT BEAM. For your own safety, please read this 15CH 17CH manual before installing the device. This manual covers the important information 0-255 PAN movement 0 ~540 on installation and applications. -
Page 4: Features And Specifications
For installations where the DMX cable has to run a long FEATURES & SPECIFICATIONS distance or is in an electrically noisy environment, such as 120 Ω Features in a discotheque, it is recommended to use a DMX • 1*60W OSRAM LE RTDUW S2WP 4-in-1 LED terminator. -
Page 5: Dmx-512 Control Connections
Regardless of the rigging option you choose for your JNR DOT BEAM , always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle. -
Page 6: Installations
(see illustration below). Be sure this fixture · The JNR DOT BEAM is for beam effect for on-site decoration purpose. is kept at least 0.5m (1.5 ft) away from any flammable materials (decoration etc.).
Need help?
Do you have a question about the JNR DOT BEAM and is the answer not in the manual?
Questions and answers