Planet FSD-504HP User Manual page 2

Cable distance for Switch
The cable distance between the FSD-504HP
and PC / PD devices should not exceed 100
Note
meters for UTP/STP cable.
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10
Mbps operation. To reliably operate your
network at 100Mbps, you must use an Un-
shielded Twisted-Pair (UTP) Category 5/5e
Note
cable, or better data grade cabling. While a
Category 3 or 4 cable may initially seem to
work, it will soon cause data loss.
Step 6: Supply power to the Fast Ethernet High Power
PoE Switch.
A. Connect one end of the power cable to the Switch.
B. Connect the power plug of the power cable to a
standard wall outlet.
When the Switch receives power, the Power LED should
remain solid Green.
- 9 -
7. Product Specifications
FSD-504HP
4-Port 10/100Mbps 802.3af / at
Model
PoE + 1-Port 10/100Mbps Desktop
Switch
Hardware Specifications
5-Port RJ-45 for 10/100Base-TX,
Network Connector
auto MDI / MDIX
4-Port with 802.3af / at PoE
PoE Inject Port
injector function (Port 2 to port 5)
System: Power (Green)
Per PoE port: PoE (Orange, port
LED Display
2 to port 5)
LNK/ACT (Green, port 1 to port 5)
Store and Forward switch
Switch Architecture
architecture
1K MAC address table with Auto
MAC Address Table
learning function
Switch Fabric 1Gbps
Switch Throughput 0.74Mpps @64Bytes
Maximum Packet Size 1536Bytes
Back pressure for Half-Duplex.
Flow Control IEEE 802.3x Pause Frame for Full-
Duplex
- 10 -
Power Requirements DC 48V, 1.5A.
Power Consumption Max.62 watts / 211.5 BTU
Dimensions
90 x 80 x 21mm
(W x D x H)
Weight 172g
Power over Ethernet
IEEE 802.3af Power over Ethernet
/ PSE
PoE Standard
IEEE 802.3at Power over Ethernet
Plus / PSE
PoE Power Supply
Mid-Span
Type
Power Pin Assignment 4/5(+), 7/8(-)
Per Port 48V DC, 375mA. Max.
15.4 watts (IEEE 802.3af)
PoE Power Output
Per Port 48V DC, 375mA. Max. 30
watts (IEEE 802.3at)
PoE Power Budget 60 watts
Number of 802.3af PD
Class 0, 1, 2, 3 can 4
be powered
Number of 802.3at PD
Class 1, 2, 3 can be 4
powered
- 11 -
Number of 802.3at
PD Class 0, 4 can be 2
powered
Standard Conformance
EMI Safety FCC Class A, CE
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control
Standard Compliance IEEE 802.3af Power over
Ethernet
IEEE 802.3at High Power over
Ethernet
Environment
Operating
0 ~ 50 degrees C
Environment
Storage Environment -10 ~ 70 degrees C
5 ~ 95%, relative humidity, non-
Operating Humidity
condensing
5 ~ 95%, relative humidity, non-
Storage Humidity
condensing
- 12 -
8. Customer Support
Thank you for purchasing PLANET products. You can
browse our online FAQ resource on PLANET Website
first to check if it could solve your issue. If you need
more support information, please contact PLANET switch
support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address:
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2013.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
- 13 -
EC Declaration of Conformity
For the following equipment:
*Type of Product: 4-Port 10/100Mbps 802.3af/at PoE + 1-Port 10/100Mbps Desktop Switch
*Model Number: FSD-504HP
* Produced by:
Manufacturer's Name : Planet Technology Corp.
Manufacturer's Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.)
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on (2004/108/EC).
For the evaluation regarding the EMC, the following standards were applied:
EN55022 (2010 + AC:2011)
EN 61000-3-2 (2006 + A1:2009 + A2:2009)
EN 61000-3-3 (2008)
EN55024 (2010)
IEC 61000-4-2 (2008)
IEC 61000-4-3 (2010)
IEC 61000-4-4 (2012)
IEC 61000-4-5 (2005)
IEC 61000-4-6 (2008)
IEC 61000-4-8 (2009)
IEC 61000-4-11 (2004)
EN60950-1 (2006 + A11:2009 + A1:2010 +
A12:2011)
Responsible for marking this declaration if the:
 Manufacturer  Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
(R.O.C.)
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Product Manager
th
Taiwan 15 Nov., 2013
Place Date Legal Signature
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528