Atm Statistics - US Robotics 9108 User Manual

U.S. Robotics Wireless MAXg ADSL Gateway User Guide

ATM statistics

This page shows statistics from the gateway's low-level ATM protocol.
ATM layer statistics over the ADSL interface
Field
In Octets
Out Octets
In Errors
In Unknown
In HEC Errors
In Invalid VPI VCI
Errors
In Port Not Enabled
Errors
In PTI Errors
In Idle Cells
In Circuit Type
Errors
In OAM RM CRC
Errors
In GFC Errors
ATM AAL5 layer statistics over the ADSL interface
file://C:\Documents%20and%20Settings\ivonne\Local%20Settings\Temp\Rar$EX13.907\wui_...
Description
This is the number of octets received by the
interface.
The number of octets transmitted over the interface.
The number of cells dropped due to uncorrectable
HEC errors.
The number of received cells discarded during cell
header validation, including cells with unrecognized
VPI/VCI values and cells with invalid cell header
patterns. If the gateway is set up to discard cells
with undefined PTI values, they are also counted
here.
This is the number of cells received with HEC errors
in ATM cell headers.
The number of cells received with an unregistered
VCC addresses.
The number of cells received on ports that have not
been enabled.
The number of cells received with a payload type
indicator (PTI) error in the ATM header.
This is the number of idle cells received.
The number of cells received with illegal circuit
types.
The number of OAM and RM cells received with cyclic
redundancy check (CRC) errors.
The number of cells received with non-zero GFCs.
第 6 頁，共 10 頁
2005/7/4