Bit Error Rate (Ber) Test - US Robotics 9108 User Manual

U.S. Robotics Wireless MAXg ADSL Gateway User Guide
data frame.
The number of redundant check bytes per
R
Reed-Solomon code word.
The length of the Reed-Solomon code word, in
S
data frames.
D The interleaver depth.
Super frames This is the total number of super frames.
Super frame The number of super frames received that had
errors errors.
This is the total number of Reed-Solomon
RS words
code words.
RS correctable The number of Reed-Solomon code words with
errors correctable errors.
RS uncorrectable The number of R-S code words that had
errors uncorrectable errors.
The total number of header error checksum
HEC errors
errors.
OCD errors The number of out-of-cell delineation errors.
LCD errors The total of lost-cell-delineation errors.
ES errors The total extended superframe errors.

Bit error rate (BER) test

A bit error rate test is available from the ADSL statistics page. Follow this procedure to run a
bit error rate test.
Warning: Running this test may cause your ADSL connection to be lost.
1. Below the table in the ADSL statistics page, click ADSL BER Test. This window
appears:
2. In Tested time, pick a length for the test. Then click Start when ready to begin the
test. The window shows you the test status. You can click Stop any time to end the
test.
file://C:\Documents%20and%20Settings\ivonne\Local%20Settings\Temp\Rar$EX13.907\wui_...
第 9 頁，共 10 頁
2005/7/4