Status Leds - US Robotics 9108 User Manual

U.S. Robotics Wireless MAXg ADSL Gateway User Guide
Wireless MAXg ADSL Gateway
User Guide
Home Installation
Installation Connections QuickSetup

Status LEDs

The gateway has several LEDs on its front. The LED conditions listed below indicate the
operational status of the gateway.
Solid The gateway is powered on.
Off The gateway is powered off.
The gateway's wireless functionality is
Solid
enabled.
The gateway and computer are exchanging
Flashing
data over a wireless connection.
Off The gateway's wireless function is disabled.
Solid The gateway is connected to the Internet.
The gateway is exchanging data with the
Flashing
Internet.
There is no active IP connection or the device
Off
is in ADSL bridge mode.
Solid An ADSL link is established.
The gateway is attempting to create an ADSL
Flashing
link.
Off There is no current ADSL connection.
There is a physical connection between the
gateway and the computer through the
Solid
corresponding Ethernet port (note the port
numbers above the LEDs).
The gateway and computer are exchanging
1-4
Flashing
data through an Ethernet port.
There is no physical connection between the
Off gateway and the computer through the
Ethernet port.
A printer is linked to the gateway.
Solid for information on using a printer with the
gateway.
file://C:\Documents%20and%20Settings\ivonne\Local%20Settings\Temp\Rar$EX45.968\leds....
Configuration Help
LEDs Advanced Uninstall
Click here
第 1 頁，共 2 頁
2005/7/4