Connection Type - US Robotics 9108 User Manual

U.S. Robotics Wireless MAXg ADSL Gateway User Guide
3. Enter the appropriate VPI, VCI and service category. The valid VPI range is from 0 to
255. The valid VCI range is from 32 to 65535. Click Next.

Connection Type

The Connection Type page allows you to select the type of network protocol over the ATM
PVC supported by the Internet Service Provider.
Select the protocol as assigned by your ISP and proceed to the matching sections in this
manual for further instructions.
PPP over ATM (PPPoA) / PPP over Ethernet (PPPoE)
1. Select the PPP over ATM (PPPoA) or PPP over Ethernet (PPPoE) radio button.
2. Select the appropriate Encapsulation Mode and click Next. The following page appears:
The page provides fields to enter the User name and the Password. The user
interface allows a maximum of 256 characters in the user name and a maximum of 32
characters in the password. For PPPoE, there is a PPPoE service name that can be blank
unless your Internet Service Provider gives you a value to enter.
file://C:\Documents%20and%20Settings\ivonne\Local%20Settings\Temp\Rar$EX05.609\wui_...
第 3 頁，共 15 頁
2005/7/4