Access Control - Ip Addresses; Access Control - Services - US Robotics 9108 User Manual

U.S. Robotics Wireless MAXg ADSL Gateway User Guide
If you enable Automatically-assigned DNS, the gateway uses the DNS IP address
provided by your Internet Service Provider during account verification, and the user-defined
fields disappear. To manually specify one or more domain name services, disable
Automatically-assigned DNS and enter the IP addresses of a primary and optionally a
secondary DNS.
If you are configuring your gateway for either routed mode or static MER mode, you will need
to manually assign a DNS address in the Primary DNS server field. You could also
optionally enter a secondary DNS server.
These settings will take effect only after you click Apply. Then restart the gateway.

Access Control - IP Addresses

This page lets you control access to the gateway's Web user interface device management
functions. You can enable or disable access to these functions by IP addresses on your local
network. To add an IP address to the list, select Add. To remove an IP address from the list,
select the appropriate checkbox in the Remove column and click the Remove button.

Access Control - Services

In this page you can enable or disable access to various Internet services for systems
connected to the gateway (in the LAN column) and machines on the Internet (the WAN
column). Click Apply to save changes.
file://C:\Documents%20and%20Settings\ivonne\Local%20Settings\Temp\Rar$EX05.609\wui_...
第 13 頁，共 15 頁
2005/7/4