SciCan Statim 2000 Training Manual page 5

End of Line CR/LF
Available options:
- No line terminator is sent after each line. To be used with printer that accepts only 20
characters per line and automatically advances to next line. Should be used with the
STATprinter.
CR A <CR> is sent at the end of the line. To be used with printers that advance to
beginning of next line when a CR is received.
CR/LF A <CR><LF> is sent at the end of the line. To be used with printers that translate
advance to beginning of next line only when LF is received.
Keypad:
Unwrapped
Wrapped
Rubber and Plastics
Stop
SciCan Suggested
External Printers
Epson
TM-U220D C31C515603)
Citizen
IDP-3110-40 RF 120B
Star Micro
SP212FD42-120
Star Micro
SP216FD41-120
Star Micro
SP512MD42-R
– Configure the printout layout
>End Of Line CR/LF
CR/LF
-
CR
This only needs to be set if a serial printer is attached to the serial port.
Select next option. Second line shows the new value
Select previous option. Second line shows the new value
Save & exit to main menu
Exit and return to normal mode of operation
End Of Line
CR/LF
CR/LF
CR
CR
CR/LF
CR/LF
(Used with printer)
Serial Port Bit Rate
9600
9600
9600
9600
9600
Printer user ° char
248 [0xF8]
N/A
210 [0xd2]
210 [0xd2]
210 [0xd2]
5