Table of Contents
Advertisement
6. When finished, click FileDisconnect.
2.6. Checking Firmware Version
Use ModemVU to check the firmware version of your HPT135.
1. Connect your modem and computer. See "Connecting HPT135 and Computer" on page 18
for this procedure.
2. Start ModemVU. Select the HPT135 and than the COM port and click Ok (see
"Configuring HPT135" on page 19).
www.javad.com
Figure 2-5. Radio Link tab
Configuration
Checking Firmware Version
Power supply requirements
21
Advertisement
Table of Contents
Need help?
Do you have a question about the HPT135 series and is the answer not in the manual?