Checking Firmware Version - Javad HPT402 Operator's Manual

Configuration

Checking Firmware Version

Power supply requirements
2.7. Checking Firmware Version
Use ModemVU to check the firmware version of your HPT402.
1. Connect your modem and computer. See "Connecting HPT402 and Computer" on page 17
for this procedure.
2. Start ModemVU. Select the HPT402 and than the COM port and click Ok (see
"Configuring HPT402" on page 18).
3. Click on Identification tab (Figure 2-7).
This tab lists important information about the hardware accessories and software proper-
ties.
4. Click FileDisconnect, then FileExit to quit ModemVU.
22
Figure 2-7. Identification tab
www.javad.com