Fluke OptiView Getting Started Manual page 23

automatically started. Devices present on your wireless network are discovered
and displayed.
Figure 6. OptiView Wireless Network Analyzer Front Page
1. The top of the screen gives immediate visibility into the security level and
potential security vulnerabilities. You can use the pull-down menu above the
device list to filter the list by device type or network configuration.
IP and Name information can be discovered if the analyzer has been configured
to autolink using a default SSID. See the Initial Setup section later in this
guide for more details.
The color coding and icon legend for the Front Page screen and throughout the
user interface can be viewed by pressing the Legend button located at the
bottom of the screen.
2. Highlight an entry in the device list and key configuration parameters are
displayed in the lower left section.
3. The overall network health is displayed in the lower center section. The
application continuously monitors 802.11a/b/g channels and reports key
statistics important for maintaining your network (e.g. signal strength, retry
Notes
Index
(continued)
apo33s.bmp
13