Fluke OptiView Getting Started Manual page 15

Index
(continued)
Moving the Software to Your OptiView Integrated Network Analyzer
There are three methods for moving the software file:
Download the software file from the Fluke Networks Web Site directly to the
analyzer
Copy the file from the OptiView Wireless Network Analyzer CD to your
analyzer using an external USB CD-ROM drive
Copy the file from your OptiView Wireless Network Analyzer CD to your PC,
and then transfer the file to the analyzer using one of the methods listed
below:
Use a direct point-to-point connection
Transfer the software file to the analyzer using the analyzer's TFTP Server
software
From the analyzer, use Microsoft Networking to map a drive on the PC, and
copy the file to the analyzer (analyzer and PC must be in same subnet)
Once the software file is on your analyzer, you will need to install it as
described in Installing the Software on the Analyzer.
5