Fluke OptiView Getting Started Manual page 16

OptiView
TM
Getting Started Guide
Downloading the Software File from the Fluke Networks Web Site Directly to
the OptiView Integrated Network Analyzer
If your OptiView Integrated Network Analyzer is connected to a network that
has Internet access, perform this procedure:
Connect the analyzer to the network and correctly configure the IP
configuration. Refer to the analyzer documentation for help if needed.
Start your web browser and go to the
Select the Support and Downloads tab and follow the instructions to select
and download the correct version of Wireless Network Analyzer software.
You are now ready to Install the Software on the Analyzer.
Copying the Software File from the OptiView Wireless Network Analyzer CD
to the OptiView Integrated Network Analyzer using an external USB CD-ROM
drive
Follow this procedure to move the file from a USB CD-ROM drive:
Connect the drive to the OptiView Integrated Network Analyzer's USB port.
Insert the OptiView Wireless Network Analyzer's CD into the CD-ROM drive.
Use the OptiView Integrated Network Analyzer's Windows Explorer to
navigate to the CD and copy the file OPVWNA-V3.EXE (located in the ...\sw
directory) from your PC to the analyzer (recommended directory is d:\temp).
You are now ready to Install the Software on the Analyzer.
Transferring the Software from your PC to the OptiView Integrated Network
Analyzer
These methods are described in the online Help. Online Help is available
from the Startup menu of the OptiView Wireless Network Analyzer CD. Insert
the CD in your PC and it will automatically load the Startup menu.
6
www.flukenetworks.com web site.