Table of Contents
Advertisement
Sequence of Operation
1. If each of T1 key (1), T2 key (2), T3 key (3), T4 key(4), T5 key(5) is entered,
the numeric keyboard appears in the lower-hand side of the display. If you enter
the temperature that you want to set and then hit the ENT key, it is set up; if you enter
the ESC key, it is cancelled.
2. If you enter DISP (6) key after executing the sequence of operation 1, it draws a figure
again that divides the field in Figure 3.3.1 according to the changed ZONE field.
3. Temperature range setup for T1 ~ T5 is between -100 and 300°C.
Additional Description
ZONE divisional setup screen
1. Case of maximum 6 Zones
Divided into 1 to 6 zones based upon the setup of T1,T2,T3,T4,T5 in the needs of 6 Zones.
-100°C
2. Case of 1 ZONE
Setup: T1 = 300, T2 = 300, T3 = 300,T4 = 300,T5 = 300 (product prevalues)
-100°C
T1
T2
1
2
3
T3
Temperature SP → High
1
Temperature SP → High
- 16 -
4
5
6
T4
T5
T1
T2
T3
T4
T5
Divided into 6 zones and
setup temperature
300°C
300°C
Advertisement
Table of Contents
