Input/Output Specifications - Honeywell IPC500 Installation Manual

4.2 Input/Output specifications

Item
PV input
RUN/STOP input
Trouble signal
Temperature
PID
Temperature
Control
PID
output
Note 1) Operation direction direct operation(freezing) / reverse operation(heating)
Changeable.
Note 2) Open collector /DC4~20mA simultaneous output.
INNER SIGNAL
RUN output
END output
TIME SIGNAL
DOWN output
TROUBLE output
Transmission output
(Auxiliary output)
Communication
Open collector out MAX DC30V, MAX50mA/1ch internal resistance 47Ω
Pt100 or JPt100
Contact input X 1 (Program RUN/STOP external signal)
Contact input X 6 (Display 6 items per screen)
Control output all OFF with Trouble signal input
Individual measure message, maximum 6 screens
Open collector output X 1
DC 4~20mA output X 1(Within load resistance 500Ω)
ON / OFF open collector out X 4 or X 8
Inner signals can be used at the freezing and Alarm Control
Each output is independently temperature, PV / SP / DV,
Absolute value / Deviation, Output operation LOW / HIGH, Output
operation ON / OFF, expansion of output X4 or out X8 when selecting
output (In use of INNER SIGNAL 8 kind TIME SIGNAL can be out of
use)
Open collector output X 1
Open collector output X 1
Open collector output X 4
Open collector output X 1
Open collector output X 1
Temperature : 4~20mA -100~300°C(range changeable)
RS232(standard), LonWorks(OPTION)
- 31 -
Specifications