Table of Contents
Advertisement
3. IPC500 Setup
The initial setup should make it appropriate for the control of the function and capacity of the
temperature chamber. It is composed and operated as shown in Figure 3.1.1.
3.1 Composition of the Display Screen
Composition of the display screen is based on ROTATION mode (Figure 3.1.1).
To enter into the initial display screen (Display to set CONTROL SET), touch the
upper right in the main display screen and push the monitor key within one
second.
Press MONITOR key in a second
after pressing the key on the top right
Menu screen
Main screen
CONTROL SET screen
NEXT
INPUT SET screen
NEXT
OFFSET & LonWorks
screen
NEXT
Press the bottom left in a second
after pressing the key on the top
<Figure 3.1.1>
- 11 -
EXIT
EXIT
EXIT
Korean/English/Chinese
conversion screen
EXIT
Advertisement
Table of Contents
