Table of Contents
Advertisement
Quick Links
DVI Dual Link Extender over 7 Strand
Multi-Mode Fiber Optic Cable
Model #: FO-DVI-DL-330
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
www.avenview.com
1
Advertisement
Table of Contents
Related Manuals for Avenview FO-DVI-DL-330 Series
Summary of Contents for Avenview FO-DVI-DL-330 Series
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
-
Page 2: Table Of Contents
Regulatory Notices Federal Communications Commission (FCC) ... 4 Introduction ... 4 Package Contents ... 5 Before Installation... 5 Installation ... 6 Section 2: Specifications ... 7 2.1 Signal Pin Assignment (Single Link) ... 8 2.2 Signal Pin Assignment (Dual Link) ... 9 www.avenview.com... -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. Safety Instructions The Avenview FO-DVI-DL-330, DVI Dual Link Extender over Fiber Optic, has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the FO-DVI-DL-330 should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. Introduction Avenview FO-DVI-DL-330 Series with fiber optic cable system lets you extend dual link digital signal up to 100m (330 feet). High Speed and long distance transmission... -
Page 5: Package Contents
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. www.avenview.com... -
Page 6: Installation
Installation Avenview FO-DVI-DL-330 is composed of a transmitter and a receiver. The Transmitter should be connected to the computer’s DVI Port and the Receiver should be connected the DVI Port of the digital display device. Avenview FO-DVI-DL-330 Transmitter is designed to be used with the LC type standard optical cable. -
Page 7: Section 2: Specifications
50/125 µm Multi-mode glass fiber 1.2” x 7.1” x 3.5” 5V 2A DC 1.5W (max) 32˚ ~ 104˚F (0˚ to 40˚C) -4˚ ~ 140˚F (-20˚ ~ 60˚C) 20~90% RH (no condensation) www.avenview.com FO-DVI-DL-330 (Receiver DVI Dual Link Receiver 7 ch GaAs PIN photo Diode... -
Page 8: Signal Pin Assignment (Single Link)
T.M.D.S. Data1- T.M.D.S. Data1+ T.M.D.S. Data1 Shield No Connect No Connect Out +5V Power Ground (for Out +5V) Hot Plug Detect www.avenview.com Signal Assignment T.M.D.S. Data0- T.M.D.S. Data0+ T.M.D.S. Data0 Shield No Connect No Connect T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. -
Page 9: Signal Pin Assignment (Dual Link)
Signal Assignment T.M.D.S. Data1- T.M.D.S. Data1+ T.M.D.S. Data1 Shield No Connect No Connect Out +5V Power Ground (for Out +5V) No Connect www.avenview.com Signal Assignment T.M.D.S. Data0- T.M.D.S. Data0+ T.M.D.S. Data0 Shield T.M.D.S. Data5- T.M.D.S. Data5+ T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. - Page 10 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
- Page 11 www.avenview.com...
Need help?
Do you have a question about the FO-DVI-DL-330 Series and is the answer not in the manual?
Questions and answers