Table of Contents
Advertisement
Quick Links
DVI Extender over Single Fiber Optic
Cable with Self-Detecting EDID
and EMI Shielding
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
Model #: FO-DVI-1000M-EMIX
www.avenview.com
1
Advertisement
Table of Contents
Related Manuals for Avenview FO-DVI-1000M-EMIX
Summary of Contents for Avenview FO-DVI-1000M-EMIX
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
-
Page 2: Table Of Contents
Section 2: Specifications ......................... 7 2.1 Case Dimensions .......................... 8 2.2 Absolute Maximum Ratings ......................9 2.3 Electrical Specifications ........................ 9 2.3.1 Transmitter Module ......................9 2.3.1 Receiver Module ......................... 10 2.4 Signal Pin Assignment ........................ 10 2.5Optical Fiber Cable ........................11 www.avenview.com... -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. Safety Instructions The Avenview FO-DVI-1000M-EMIX, DVI Extender over Fiber Optic has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the FO-DVI-1000M-EMIX should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
Introduction Avenview FO-DVI-1000M-EMIX DVI Extender over Fiber lets you extend digital flat panel signal up to 500 meters (1650 feet) at 1920 x 1200 and 1000 meters (3300 feet) at 1280 x 1024 away from host by TMDS digital signal and EDID transmission with only 1 fiber. -
Page 5: Installation
This product is composed of a Transmitter and a Receiver. The Transmitter should be connected to the computer’s DVI Port and the Receiver should be connected the DVI Port of the digital display device. Avenview FO-DVI-1000M-EMIX Transmitter / Receiver is designed to be used with SC type standard optical cable (Multi-Mode optical fiber: 50/125, 62.5/125um). -
Page 6: Caution
Caution 1. Do not put heavy object on top of the FO-DVI-1000M-EMIX. It may cause product malfunction. 2. Put the product on even and stable location. If the product falls down or dropped, it may get damaged. 3. Keep away from high temperature (over 50°C), low temperature (under 0°C) or high humidity. It may cause a fire and injury by electrical shock. -
Page 7: Section 2: Specifications
Section 2: Specifications Item Description Units FO-DVI-1000M-EMIX (Transmitter) FO-DVI-1000M-EMIX (Receiver) Unit Description DVI Transmitter over Fiber Optic DVI Receiver over Fiber DVI Compliance DVI 1.0 HDCP Compliance HDCP 1.1 Video Bandwidth 2.25 Gbps Single Link WUXGA 1920 x 1200 @ 500 meters ( 1650 feet) Supported Resolution &... -
Page 8: Case Dimensions
2.1 Case Dimensions www.avenview.com... -
Page 9: Absolute Maximum Ratings
-0.6 -0.4 Signal ended Input Swing Voltage ISWING Signal ended Standby Input Voltage -0.01 +0.01 Data Output Load Ω Transmitter module of Model DSP includes 4 channel VCSEL(Vertical Surface Emitting Laser Diode) with 850nm, 911 nm invisible laser radiation. www.avenview.com... -
Page 10: Receiver Module
T.M.D.S. Data1 Shield T.M.D.S. Data0 Shield No Connect No Connect No Connect No Connect No Connect No Connect DDC Clock (SCL) +5V Power T.M.D.S. Clock Shield DDC Data (SDA) Ground (for +5V) T.M.D.S. Clock+ No Connect Hot Plug Detect T.M.D.S. Clock- www.avenview.com... -
Page 11: Optical Fiber Cable
2.5Optical Fiber Cable The construction of 4 Optical Fibers and 4 Copper wires cable shall be in accordance with Figure and Table below: www.avenview.com... - Page 12 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the FO-DVI-1000M-EMIX and is the answer not in the manual?
Questions and answers