The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Dvi extender over fiber with emi shielding (8 pages)
Summary of Contents for Avenview FO-HDM4K-200-EMIX
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims...
Page 2
Product Application & Market Sectors Corporate House Of Worship Military Residential Education Industrial Medical Aviation www.avenview.com...
• Removal, installation, and set-up service charges. SAFETY INSTRUCTIONS The Avenview FO-HDM4K-200-EMIX, HDMI Extender over fiber Optic has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all fibre optic products, the FO-HDM4K-200- EMIX should be used with care.
BEAM uSED IN OpTICAl COMMuNICATIONS ARE INVISIBlE AND CAN SERIOuSly DAMAGE THE EyES. VIEWING IT DIRECTly DOES NOT CAuSE ANy pAIN TO THE EyE BuT SERIOuS DAMAGE CAN BE DONE TO THE RETINA Of THE EyE www.avenview.com Page 2...
The FO-HDM4K-200-EMIX-SET includes two (2) units: Sending unit (TX) FO-HDM4K-200-EMIX-S and Receiving unit (RX) FO-HDM4K-200-EMIX-R with one (1) FTP output port which allows the user to extend video and audio up to 200m (656ft). The FO-HDM4K-200-EMIX-SET input and output supports HBR2 cable assembly to handle upto 5.4Gbps/lane data rate.
CONTENTS Before you start the installation of the converter, please check the package contents. (FO-HDM4K-200-EMIX-SET) FO-HDM4K-200-EMIX-S (TX) FO-HDM4K-200-EMIX-R (RX) pOWER ADApTER (5V/2A DC) HDIMI (COPPER CABLE - 3FT) uSER’S MANuAl www.avenview.com Page 4...
DESCRIpTION 4.1 FRONT PANEL (Sender, HDM4K-200-EMIX-S) LED Light: Green light indicates an active HDMI IN connection. 4.2 REAR PANEL (Sender, FO-HDM4K-200-EMIX-S) LAN: Connect Cat 5/6 For media 5V 2A Power Supply Jack streaming linking to Receiver www.avenview.com Page 6...
4.3 FRONT PANEL (Receiver, FO-HDM4K-200-EMIX-R) LED Light: Green light indicates an active HDMI OUT connection. 4.4 REAR PANEL (Receiver, FO-HDM4K-200-EMIX-R) LAN: Connect Cat 5/6 For media streaming 5V 2A Power Supply Jack linking to Receiver www.avenview.com Page 7...
The Transmitter should be connected to the source (Computer’s HDMI Port ) and the Receiver should be connected to the HDMI of the digital display device (Monitor). Avenview FO-HDM4K-200-EMIX-SET Transmitter / Receiver is designed to be used with SC type standard optical cable (Multi-Mode optical fiber: 50/125, 62.5/125um) BEFORE INSTALLATION ...
CABLE SPECIFICATIONS We highly recommend achieving best results with our FO-HDM4K-200-EMIX you acquire a high quality 26 or 24 AWG HDMI cable with the below specifications to maintain signal integrity and distances. Features • Simultaneous delivery of dual video and audio streams •...
• Make sure that the quantity of optical fiber waste is minimized. Closures containing termination points for optical fiber cabling must be labeled with appropriate warning signs or a clearly viewable text. • There are four l aser Classifications based on risk levels. l aser manufacturers are required to label their lasers accordingly. www.avenview.com Page 10...
Check if the PC and display are powered on and properly booted. Check if optic fiber is connected properly. No display Blink / Blink - please make sure that power supply is connected into TX and RX. - Reset the system by de-plugging and re-plugging all conections www.avenview.com Page 11...
CAUTION 1. Do not put heavy object on top of the FO-HDM4K-200-EMIX. It may cause product malfunction. 2. Put the product on even and stable location. If the product falls down or dropped, it may get damaged. 3. Keep away from high temperature (over 50°C), low temperature (under 0°C) or high humidity. It may cause a fire and injury by electrical shock.
SPECIFICATIONS ITEM DESCRIPTION MODEL FO-HDM4K-200-EMIX-S FO-HDM4K-200-EMIX-R UNIT DESCRIPTION HDMI Extender Transmitter HDMI Extender Receiver INPUT VIDEO PORT HDMI Optical INPUT RESOLUTION Up to 4K (4096X2160) @ 60Hz Up to 4K (4096X2160) @ 60Hz HDMI OUTPUT VIDEO PORT Optical OUTPUT RESOLUTION...
Page 19
PARTS: During the Warranty Period of of THREE (3) YEARS, Avenview will supply new or rebuilt replacements in exchange for defective parts of the product(s) at no cost if the product(s) is determined to have abide by Avenview’s published guidelines. Cost of Parts applicable to product(s) after Warranty Period. For part(s) costs, please contact support@avenview.com.
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the FO-HDM4K-200-EMIX and is the answer not in the manual?
Questions and answers