Table of Contents
Advertisement
Quick Links
DVI Extender over Fiber Optic Cable
Model #: FO-DVI-XX-MM
© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
www.avenview.com
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avenview FO-DVI-XX-MM
Summary of Contents for Avenview FO-DVI-XX-MM
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
-
Page 2: Table Of Contents
2.4 Characteristics of DVI Connector ... 10 2.4.1 Material ... 10 2.4.2 Electrical ... 10 2.4.3 Mechanical ... 10 2.5 Characteristics of FO-DVI-XX-MM ... 11 2.5.1 Mechanical ... 11 2.6 FO-DVI-XX Cable Construction ... 12 2.7 Physical Interconnect Specification ... 13 2.7.1 Mechanical Characteristics ... -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. Safety Instructions The Avenview FO-DVI-XX-MM, DVI Extender System over Fiber Optic, has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the FO-DVI-XX-MM should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. Introduction Avenview FO-DVI-XX-MM Series with fiber optic cable system lets you extend digital flat panel signal up to 100 meters (330 feet). High Speed and long distance transmission by Optical fiber... -
Page 5: Model Description
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. Do not twist or pull by force ends of the optical cable. It can cause malfunction. FO-DVI-XX-MM Length in Meters (5 = 5 meters, 10 = 10 meters) www.avenview.com... -
Page 6: Installation
Installation Avenview FO-DVI-XX-MM is composed of a Transmitter converting the graphic signal of a computer to optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor converted from the optical signal to electrical signal. The Transmitter should be connected to computer and the Receiver should be connected to a monitor. -
Page 7: Section 2: Specifications
Section 2: Specifications Item Units FO-DVI-XX-MM (Transmitter) Unit Description DVI Fiber Optic Transmitter Input Signal Output Signal Video Bandwidth Supported Resolution & Distance Optical Converter 4 ch 850 nm Multi-Mode VCSEL DVI Connector Optical Connector DDC Link Connector Fiber Type... -
Page 8: Part List
Glass filled thermoplastic UL94V-0 Glass filled PC UL94V-0 SUM 24L+ABS FR-4, 1.5t UL94V-0 PA46 UL94V-0 + C5210 PA46 UL94V-0 FR-4, 1.5t UL94V-0 See Section 4 See Section 4 Polyester-matte 3.3mil Polyamide 6/6 E191362 (UL No) www.avenview.com PVC 55% GaAs GaAs... -
Page 9: Power Consumption And Ddc Power Requirements
Receiver Transmitter module of FO-DVI-XX-MM without external power supply is operated by drawing out power for DDC from the computer and receiver module of FO-DVI-XX-MM cable also utilize the DDC power delivered via copper wire. If graphic board of the computer does not supply over 0.6A, 5V, FO-DVI-XX-MM cable may not operate normally. -
Page 10: Characteristics Of Dvi Connector
Insulation Resistance Dielectric withstanding Voltage 2.4.3 Mechanical Mating Force Un-mating Force Glass Filled Thermoplastic, Black UL94V-0 Brass Steel (Nickel Plated) 1.5A, 40V (AC) 20 m Maximum 1000 m Minimum 500VDC 4.5Kg (10lbs) Maximum 1Kg (2.2lbs) Minimum 4Kg (8.8lbs) Maximum www.avenview.com... -
Page 11: Characteristics Of Fo-Dvi-Xx-Mm
2.5 Characteristics of FO-DVI-XX-MM 2.5.1 Mechanical The construction of the buffered optical fiber shall be in accordance with Figure 1 and Table 1 below: Item Fiber Type Index Profile Material Core Diameter Non-circularity Material Cladding Diameter Concentricity error Material Buffer Coating... -
Page 12: Fo-Dvi-Xx Cable Construction
2.6 FO-DVI-XX Cable Construction The construction of 4 Optical Fibers and 4 Copper wires cable shall be in accordance with Figure and Table below: The Dimension of FO-DVI-XX-MM Cable Items DVI Cable Make-up Drain Wires (Size/Stranded) AL-Mylar Screen Shield Cable Outer Diameter... -
Page 13: Physical Interconnect Specification
All sample to be mated Un-mating force: Mating force: cable strain relief & No discontinuities greater than 1 us while continuity. Isolate receptacle interface www.avenview.com Requirements maximum change from 1 kg force minimum, 4 kg force maximum 4.5 kg force maximum... -
Page 14: Connector Electrical Characteristics
55°C, maximum ambient 85°C, maximum temperature change IEC 801-2 Test un-mounted from 1kV to 8kV in 1kV steps using 8mm ball probe www.avenview.com Requirements 20mΩ, maximum, initial per contact mated pair 10mΩ, maximum change from original per contact mated pair 50mΩ, maximum initial... - Page 15 Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the FO-DVI-XX-MM and is the answer not in the manual?
Questions and answers