Table of Contents
Troubleshooting
Related Manuals for Avenview FO-HDM2-T4K-SET
Summary of Contents for Avenview FO-HDM2-T4K-SET
- Page 1 VIDEO WALLS VIDEO PROCESSORS VIDEO MATRIX SWITCHES EXTENDERS SPLITTERS WIRELESS CABLES & ACCESSORIES Control Your Video PRODUCT MANUAL Model: FO-HDM2-T4K-SET 4K@60Hz HDMI 2.0 FIBER EXTENDER with Audio Support (IR/RS232/ARC/OPTICAL)
- Page 2 Copyright © 2018 Avenview Inc. All rights reserved. Revision History The contents of this document are provided in Rev. Changes Date connection with Avenview Inc. (“Avenview”) products. 0.00 Initial Release 02/01/2018 Avenview makes no representations or warranties with 1.00 Populated Data...
-
Page 3: Table Of Contents
RECEIVER - DEVICE FUNCTIONS.........13 4.2.1 AUDIO SELECT............13 4.2.2 SETTING BUTTON............13 4.2.3 TEST PATTERN GENERATOR..........13 4.2.4 TROUBLESHOOTING RECEIVER..........14 RS-232 CONFIGURATION..........15 IR CONFIGURATION............16 4.4.1 IR CONNECTIONS TO FO-HDM2-T4K-T (TRANSMITTER).......17 4.4.2 IR CONNECTIONS TO FO-HDM2-T4K-T (TRANSMITTER).......17 SPECIFICATIONS..............18 CABLE SPECIFICATIONS (CONT).........19 WARRANTY CARD..............20 END................21 www.avenview.com Rev.00 03/2018... -
Page 4: Getting Started
However, like all electronic equipments, the FO-HDM2-T4K-SET should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 5: Regulatory Notices Federal Communications Commission (Fcc)
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Avenview is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. -
Page 6: Introduction
4K sources streaming, network connected devices and new demand for Smart TV, ultra HD monitors,, and content. The FO-HDM2-T4K-SET finds its way into market sectors such as Medical, Education, command & control environments and any long distance extension application. -
Page 7: Package Contents
PACKAGE CONTENTS Before you start the installation of the FO-HDM2-T4K-SET, please ensure that the packaging has the listed items below. ITEM FO-HDM2-T4K-SET POWER ADAPTER (48V / .5A) *US C7 POWER CORD *Based on order request IR RECEIVER IR TRANSMITTER MOUNTING EARS... -
Page 8: Application Diagram
APPLICATION DIAGRAM www.avenview.com Rev.00 03/2018... -
Page 9: Panel Description
IR MODE: Select preferred IR mode. SETTING: Pressed to select different setting options. SINGLE FIBER: Connection for fiber optic cable. EXTRACT FROM: Select where the Toslink audio get the signal. SPDIF OUT: Optical output used for audio pass through. www.avenview.com Rev.00 03/2018... -
Page 10: Fo-Hdm2-T4K Receiver Front
AUDIO SELECT: Select where audio will come from. SETTING: Pressed to select different setting options. SINGLE FIBER: Connection for fiber optic cable. PATTERN TEST: Generates a test pattern for on board troubleshooting. SPDIF IN: Optical input used for audio pass through. www.avenview.com Rev.00 03/2018... -
Page 11: Before Installation
• Keep the device away from water. If the unit becomes wet, power off immediately. • Installation of the equipment must comply with local and national electrical codes. • Take care when connecting units to the electrical power circuit in case the maximum rated circuit is not overloaded www.avenview.com Rev.00 03/2018... -
Page 12: Cable Specifications
CABLE SPECIFICATIONS We highly recommend achieving best results with our FO-HDM2-T4K-SET you acquire a high quality 26 or 24 AWG HDMI cable with the below specifications to maintain signal integrity and distances. Features - HDMI 2.0(a/b) - HDCP 2.2 & Earlier... -
Page 13: Installation
The Transmitter should be connected to the source (Computer’s HDMI Port/IR Signal/RS-232) and the Receiver should be connected to the HDMI of the digital display device (Monitor/TV). Avenview FO-HDM2-T4K-SET Transmitter / Receiver is designed to be used with SC type standard optical cable (Multi-Mode or Single-Mode optical fiber) TRANSMITTER - DEVICE FUNCTIONS 4.1.2 - IR Mode... -
Page 14: Scaler Setting
• NOTE: When "ARC" is selected on both Tx and Rx the HDMI ARC is open for appropriate devices. ie, you can plug into an AVR with ARC and a TV with ARC and get support via the HDMI Cable. The button looks like this: www.avenview.com Rev.00 03/2018... -
Page 15: Troubleshooting Transmitter
- If these suggestions do not work, enable the "Test Pattern" (Please use a UNIVERSAL DIGITAL/ANALOG AUDIO CONVERTER FOR DOWN MIXING). If you see the pattern, the problem is between the source and the transmitter, please try a different source. - Contact Avenview support if these suggestions do not work. www.avenview.com Rev.00 03/2018... -
Page 16: Receiver - Device Functions
1. 1080P --- LED Flashes 1 Time (3 Sets of color bars) 2. 4K --- LED Flashes 2 Time (5 sets of color bars) This is useful for checking cabling and for troubleshooting. It will check the link between the Rx and the display/sink. www.avenview.com Rev.00 03/2018... -
Page 17: Troubleshooting Receiver
- If these suggestions do not work, enable the "Test Pattern" (See Below). If you see the pattern, the problem is between the Receiver and display/sink please try a different sink input or HDMI cable. - Contact Avenview support if these suggestions do not work. www.avenview.com... -
Page 18: Rs-232 Configuration
This is how the cable should look. If using the AC-CABLE-3.5-DB9F (Female) or AC-CABLE-3.5-DB9M (Male), the colorswill be the same. With any other cable, please follow Tx, G, Rx (See Fig. 4.3.A). A RS-232 cable preparation diagram is on the next page. Fig. 4.3.A www.avenview.com Rev.00 03/2018... -
Page 19: Ir Configuration
"IR-EYE" on the Transmitter. 3. From Remote End: Use an IR-Receiver Eye on the FO-HDM2-T4K-R Receiver (IR In Port) in order to send IR signals BACK to the rack and out of the TRANSMITTER IR Out Port with an emitter. www.avenview.com Rev.00 03/2018... -
Page 20: Ir Connections To Fo-Hdm2-T4K-T (Transmitter)
IR IN w/ Receiver Eye (”IR-EYE” Mode) VCC (+) IR SIGNAL GROUND IR SENSOR 4.4.2 IR Connections to FO-HDM2-T4K-R (Receiver) IR IN (IR-EYE Only) IR OUT Emitter (Non-Flashing) SIGNAL VCC (+) IR SIGNAL GROUND NC / GROUND IR SENSOR EMITTER www.avenview.com Rev.00 03/2018... -
Page 21: Specifications
50/125 µm Multi-mode glass fiber OM2 or OM3 rated fiber <LABEL> E NVI RON ME NT 32˚ ~ 104˚F (0˚ to 40˚C) OPERATING TEMPERATURE STORAGE TEMPERATURE -4˚ ~ 140˚F (-20˚ ~ 60˚C) RELATIVE HUMIDITY 20~90% RH (no condensation) www.avenview.com Rev.00 03/2018... -
Page 22: Cable Specifications (Cont)
CABLE SPECIFICATIONS (CONT) To achieve the best results with your FO-HDM2-T4K-SET, Avenview highly recommends using Premium High Speed HDMI Cables or Premium High Speed HDMI Cables with Ethernet. Cables certified as Premium High Speed are individually tested for performance and will carry a special anti-counterfeit label to differentiate them from other HDMI cables. -
Page 23: Warranty Card
www.avenview.com... -
Page 24: End
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the Avenview hardware, software, or other products and documentation provided herein.
Need help?
Do you have a question about the FO-HDM2-T4K-SET and is the answer not in the manual?
Questions and answers