Table of Contents
Advertisement
Quick Links
DVI Extender over single multi-mode
SC Fiber TMDS video and EDID data
Model #: FO-DVI-1000X-EMIX
© 2012 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product deLCriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and diLClaims any express or implied warranty, relating to its
www.avenview.com
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avenview FO-DVI-1000X-EMIX
Summary of Contents for Avenview FO-DVI-1000X-EMIX
- Page 1 No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and diLClaims any express or implied warranty, relating to its...
-
Page 2: Table Of Contents
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited. -
Page 3: Section 1: Getting Started
Removal, installation, and set-up service charges. Safety Instructions The Avenview FO-DVI-1000X-EMIX, DVI Extender over Fiber Optic has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the FO-DVI-1000X-EMIX should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. -
Page 4: Regulatory Notices Federal Communications Commission (Fcc)
300 meters away from host based on DVI standard by optical transmission technology. It can transmit EDID data and HDCP over fiber in real time. FO-DVI-1000X-EMIX can be used with DVI device as well as HDMI standard device such as Blu-ray player, PS-3. -
Page 5: Installation
The Transmitter should be connected to the source (Computer’s DVI Port) and the Receiver should be connected the DVI Port of the digital display device (Monitor). Avenview FO-DVI-1000X-EMIX Transmitter / Receiver is designed to be used with LC type standard optical cable (Multi-Mode optical fiber: 50/125, 62.5/125um). -
Page 6: Troubleshooting
Check the maximum resolution range of the graphics card. Caution 1. Do not put heavy object on top of the FO-DVI-1000X-EMIX. It may cause product malfunction. 2. Put the product on even and stable location. If the product falls down or dropped, it may get damaged. -
Page 7: Section 2: Specifications
Optical Optical Source 850nm VCSEL O/E Converter PIN Photo Diode Fiber Type 50/125 LC Multi-Mode Fiber Environmental Operation 0˚ to 50˚C Degree Storage -20˚ to 70˚C Degree RESOLUTIONS DISTANCE WUXGA (1920 X1200) 300M (1000FT) 1080P (1920 X 1080) 300M(1000FT) www.avenview.com... -
Page 8: 2.1 Signal Pin Assignment
No Connect T.M.D.S. Clock+ No Connect No Connect T.M.D.S. Clock- Max Attenuation Bandwidth Fiber Type Wavelength (nm) Coefficient (dB/km) (MHz-km with overfilled launch) 50/125 (OM2) 50/125 (OM2) 1300 50/125 (OM3) 2000 50/125 (OM3) 1300 6.25/125 (OM1) 6.25/125 (OM1) 1300 www.avenview.com... - Page 9 DiLClaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation deLCribed herein, for any act or omission of...
Need help?
Do you have a question about the FO-DVI-1000X-EMIX and is the answer not in the manual?
Questions and answers