The contents of this document are provided in connection with Avenview Inc. ("Avenview") products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.
8k displayport 1.4 extender over fiber optic cable (17 pages)
Summary of Contents for Avenview FO-DVI-1000M-EMI
Page 1
No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Removal, installation, and set-up service charges. Safety Instructions The Avenview FO-DVI-1000M-EMI, DVI Extender over Fiber Optic has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment’s, the FO-DVI-1000M-EMI should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Introduction Avenview FO-DVI-1000M-EMI DVI Extender over Fiber with EMI Shielding lets you extend digital flat panel signal up to 1000 meters (3300 feet) at 1920 x 1200 away from host by TMDS digital signal transmission with only 1 fiber.
This product is composed of a Transmitter and a Receiver. The Transmitter should be connected to the computer’s DVI Port and the Receiver should be connected the DVI Port of the digital display device. Avenview FO-DVI-1000M-EMI Transmitter / Receiver is designed to be used with SC type standard optical cable (Multi-Mode optical fiber: 50/125, 62.5/125um).
Check the maximum resolution range of the graphics card. Caution 1. Do not put heavy object on top of the FO-DVI-1000M-EMI. It may cause product malfunction. 2. Put the product on even and stable location. If the product falls down or dropped, it may get damaged.
Section 2: Specifications Item Description Video Bandwidth 1.65Gbps (Single Link) DVI 24Pin Plug and SC Connector Connector Power Consumption 1.0 Watt (max) Supported Resolution WUXGA 1920 x 1200 @ 1000 meters (3300 feet) and Distance Optical Optical Source 850nm VCSEL O/E Converter PIN Photo Diode Fiber Type...
Page 8
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of...
Need help?
Do you have a question about the FO-DVI-1000M-EMI and is the answer not in the manual?
Questions and answers