Mode Select Feature - Motorola APX 6000XE User Manual

English
A channel is a group of radio characteristics, such as
transmit/receive frequency pairs. Do one of the following to
select a radio channel. You can use the options
interchangeably depending on your preference and the
programmed functions.
• Select a channel using the preprogrammed 16–
Position Select Knob to the desired channel.
a. Rotate the preprogrammed 16–Position Select
Knob to the desired channel.
b. Press the PTT button to transmit on the displayed
zone channel.
• Select a channel using the radio menu Chan:
a. or to Chan.
b. Press the Menu Select button directly below
Chan.
c. or to the required channel.
d. Press the Menu Select button directly below Sel
to confirm the selected channel.
e. Press the PTT button to transmit on the displayed
zone channel.
• Select a channel using the radio menu Channel Up
or Channel Down:
64
a. or to ChUp or ChDn.
b. Press the Menu Select button directly below
ChUp or ChDn.
Positions of ChUp and ChDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
c. Press the PTT button to transmit on the displayed
zone and channel.

Mode Select Feature

Mode Select allows a long press to save the current zone
and channel of your radio to a programmable button, or a
softkey; then once programmed, the short-press of that
button or softkey changes the transmission to the saved
zone and channel.
There are two methods to save the selected zone and
channel:
• Softkeys
• Programmable buttons
NOTICE:
Your radio must be preprogrammed for you to use
this feature.
Send Feedback