Turning On Bluetooth Visibility - Motorola APX 6000XE User Manual

• or to BT. Press the Menu Select button
directly below BT to access the Bluetooth feature
screen. or to Search Devices and press
the Menu Select button directly below On.
If successful, the display shows Searching for BT
devices followed by the names of Bluetooth devices
found, if any. When the search timer expires,
Available Dev screen shows a list of Bluetooth
devices found. To stop the search before the search
timer expires, press the preprogrammed Bluetooth
Search button or the Menu Select button below
Stop.
If the feature fails to initiate, the radio sounds a
short, low-pitched tone. The screen shows BT
Search failed. Press the Menu Select button below
Back to return to Bluetooth feature screen, or press
or the Menu Select button below Exit to return to
Home screen.
2 or to the device name and press the Menu
Select button directly below Sel to connect to the
device.
The radio starts pairing to the device.
Send Feedback
To continue with Bluetooth pairing, see
Frequency-Motorola Proximity Pairing (LF-MPP) Feature
on page 140.

Turning On Bluetooth Visibility

Turning Bluetooth visibility on enables other Bluetooth
devices to search for your radio. The visibility of the
Bluetooth is set to turn off by default.
Do one of the following to turn on Bluetooth visibility. You
can use the options interchangeably depending on your
preference and the programmed functions.
• Turn on Bluetooth visibility using the radio menu BT:
a. or to BT. Press the Menu Select button
directly below BT to access the Bluetooth feature
screen.
b. or to Visibility and press the Menu Select
button directly below On.
The status changes to Visible to all. Visibility
mode is enabled.
When the timer expires, the status changes to
Visibility failed. Repeat the procedure to turn on
Bluetooth visibility.
English
Pairing with Low
143