Transmit Inhibit; Enabling Transmit Inhibition - Motorola APX 6000XE User Manual

Mode Description
two PTT button presses within the
preprogrammed time limit.

Transmit Inhibit

This feature is available for APCO 25 trunking, Type II
trunking and Conventional operations for all APX radios.
When Transmit Inhibit feature is enabled, the radio stops all
transmission including voice and data. The radio can
receive messages but is not able to reply the
acknowledgment request of the received message.
User can physically control the transmission of the radio
especially during operation in hazardous environments with
this feature. An environment is considered hazardous when
the power emitted by the radio power amplifier could initiate
an explosion or other dangerous reactions.
When the Transmit Inhibit feature is disabled, the radio
functions according to its normal operations.
The radio sounds alert tone when user enters or exits this
feature and also when PTT is pressed.
Send Feedback
NOTICE:
Acknowledgement of any messages required from
the radio is not transmitted if the Transmit Inhibition
is enabled.

Enabling Transmit Inhibition

Perform one of the following actions:
• Switch the preprogrammed Transmit Inhibit
switch to Transmit Inhibit enabled.
• or to TxIn. Press the Menu Select button
below TxIn.
• Press the Transmit Inhibit programmable button.
English
171