Sharp UX-D1200SE Operation Manual page 38

Register Handset Settings
6
The current base name appears. If
desired, you can press C to delete
the old base name and then enter a
new name (see Step 3 on page 23).
When the desired name appears,
press (Valid.).
7
Enter the system PIN (4 digits) of
the machine (see page 35). Press
(Valid.).
•
The handset enters registration
mode.
On the machine (the base)
MENU
1
Press , then
[REGISTER HS SETTING] appears
2
Press twice
3
Press .
•
Registration begins.
On the cordless handset
1
When the cordless handset display
indicates that registration is finished,
enter the number from 1 to 5 that
you would like to assign to the
handset.
•
A number that is already assigned to
another cordless handset cannot be
used.
36
until
.
.
Deleting a cordless handset
To delete the registration of a cordless
handset from the machine, follow the
steps below. This procedure can be
used if you need to disable a cordless
handset.
♦
Perform the following steps on the
machine.
MENU
1
Press , then
[REGISTER HS SETTING] appears
2
Press , then
[HS DELETE] appears.
3
Press .
4
Enter the number of the handset (1
to 5) that you wish to delete.
5
Press .
6
Enter the system PIN (4 digits) of
the machine (see page 35; if the
system PIN has not been changed
from the intial factory-set PIN, enter
"0000").
7
Press to delete the handset.
STOP
8
Press to exit.
until
.
until